Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13627754
- Product Categories
- Friendly Links
Information Name: | Adjustable flue domestic cement cement flue machine factory direct |
Published: | 2015-04-01 |
Validity: | 30 |
Specifications: | High quality |
Quantity: | 100.00 |
Price Description: | |
Detailed Product Description: | Technical guidance domestic cement flue flue machine a cement flue machine Introduction: Currently exhaust flue on the construction market mainly mold, artificial cement paste made of smoke, airway, such products can not reach the building Ministry of National Standards promulgated by the State Development and Reform Commission "JG / T194-2006" and "JC / T854-2008" standard technical requirements, especially cement flue products flexible impact resistance, fire resistance of two important indicators, were unable to meet the standard requirements. Gongyi Hong of the company to develop high-strength cement flue fire molding machine. The model is simple, two groups of both production and easy to understand. Without changing the mold, uniform thickness, strength producing products meet JG / T194-2006 standard, up to the national A-class fire protection requirements. Using the market to solve the cement mortar and fiberglass mesh handmade flue pipe brittle, not strong enough, the fire is not up to the problem of uneven thickness. Use flue pipe mechanism, greatly improving the quality of the building, but also to avoid the building due to non-compliance with hand flue products cause a major accident, it is clear floor flue problems exist concerns to the general public to be more at ease, comfortable living. A flue machine, cement flue machine Introduction: Currently exhaust flue on the construction market mainly mold, artificial cement paste made of smoke, airway, such products can not reached the national Ministry of Construction, the National Development and Reform Commission issued Standard "JG / T194-2006" and "JC / T854-2008" standard technical requirements, especially cement flue products flexible impact resistance, fire resistance of two important indicators, were unable to meet the standard requirements. Our company developed high-strength cement flue fire molding machine. The model is simple, two groups of both production and easy to understand. Without changing the mold, uniform thickness, strength producing products meet JG / T194-2006 standard, up to the national A-class fire protection requirements. Using the market to solve the cement mortar and fiberglass mesh handmade flue pipe brittle, not strong enough, the fire is not up to the problem of uneven thickness. Use flue pipe mechanism, greatly improving the quality of the building, but also to avoid the building due to non-compliance with hand flue products cause a major accident, it is clear floor flue problems exist concerns to the general public to be more at ease, comfortable living. Second, cement flue machine equipment advantages: 1, can be made into a variety of shapes, ventilation flue for various purposes. 2, simple operation, stripping easy, low-tech production; mold production, uniform thickness, a molding, high strength, high yield 3, smooth surface, friction coefficient, low drag; lightweight, anti- crack, strong tensile, easy transportation and installation 4, no distortion, no cracks, good volume stability, simple construction operations; environmental protection, non-toxic, anti-aging, corrosion-resistant, odorless, shock absorption silencer 5, simple materials, facilitate the procurement low cost, location and direction of the flue vent unlimited selection of easy-to-design, easy installation, ventilation flue production line is the latest development of lightweight high-strength ventilation flue, can cement, sand, and you can also use powder ash and straw and other lightweight materials production, product strength, cement, sand products 3-5 times, the intensity modulated according to need. Weight is just an ordinary cement, sand making ventilation flue products 1/5 to 1/4, making convenient, low cost, than cement, sand making ventilation flue low around 1/5. Three: flue operating method, mold shrinkage button is pressed out of the box, put the mold back. Loosen the two sides of the tank portion of the handle panel, and then put the box on both sides of the baffle plate and the front end of the mold box fully open. 2. Oil it with waste oil ready to die within four, the inner sides of box board, the bottom bracket and the inside of the front bezel all even wipe it again, in order to facilitate the post-stripping. 3, the installation of the glass screen mesh, steel mesh or plastic mesh crop to be slightly shorter than the total length of the flue pipe, cover the inner mold around joints fixed with a tie tied tight strands. 4, close to both sides of the box and the front baffle box board machine is closed, pull handle tightening, clamping bolt the front bezel. Then press the button to open up to the mold distraction. 5, by adding hot steam boiler steam pipe connected to the flue pipe machine, and to maintain adequate gas supply. 6, grouting cement and sand forming a 1: 2.5 to 1: the ratio (or adjust the ratio according to customer needs) 3 uniformly mixed in the blender and blend well and pour into the mold box, until the top above the grid. Then start vibrating machine, until the grout to fill the gap between the inside and outside no longer continue down to reduce mold, after closing vibration machine. Upper position angle iron with grout highly leveled, remove excess cement, and finally pulled back and forth with shiny flat light flat, you can wait for the molding. 7, waiting for solidification after waiting a certain time (depending on the size and shape of the flue pipe wall thickness of the case may be), observed on the surface of the flue pipe cement solidification, when significantly reduce the cement surface moisture, when finger pressure to feel a certain hardness, Out of the box you can enter the program. 8, the mold ① stop gas supply and transit, close the valve; ② recover the mold (in-mold before closing left and right, up and down both sides of the post-harvest); ③ Open the front bezel and sides of box board. Place a good solid roller transfer vehicle, along with the bottom of the flue pipe to transport the car to pull together. Overall flue pipe to transport the car after all the scroll, transfer to a suitable spot to store, then go to the next production cycle mode. Flue product regular size 25 × 30cm 30 × 35cm 30 × 40cm 35 × 40cm 35 × 45cm 35 × 50cm 40 × 50cm 45 × 55cm custom processing is the type of cement machinery molding cycle 15 (points) Transmission of vibration excitation frequency 4200 (times / min) maximum pressure 4 (KN) Total Weight 1200 (t) frequency 50 (hz) working pressure 31.5 (Mpa) Dimensions 4000 * 800 * 1000 (cm) capacity 2 (kw) molding pressure 3 (t) main vibration mode vibration of the total power in the form of 2.2km (w) brand HTC flue plate thickness specifications standard length standard width 1.0-1.2cm 25cm 30cm 1.0-1.2cm 30cm 35cm 1.0-1.2cm 30cm 40cm 1.2-1.5cm 35cm 40cm 1.2 -1.5cm 35cm 40cm 1.2-1.5cm 35cm 50cm 1.5-2.0cm 40cm 50cm 1.5-2.0cm 45cm 55cm HTC cement flue machine Pledge: Pre-sale services: to provide you with project design, process design, suitable for your machine develop equipment purchase programs, depending on your specific needs, design and manufacture products for your training, technical operations Sale of services: to accompany you to complete acceptance of the equipment, assist in the development process and the detailed construction plan service: the company sent technicians to the except for consumable year warranty: on-site guidance equipment installation, commissioning and training of operating personnel on-site product quality! Welcome to the new and old customers to Gongyi Hong up study interviews. |
Admin>>>
You are the 9262 visitor
Copyright © GuangDong ICP No. 10089450, Gongyi City Hongda Automobile Air Conditioner Factory All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 9262 visitor
Copyright © GuangDong ICP No. 10089450, Gongyi City Hongda Automobile Air Conditioner Factory All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility